Active Blogs | Popular Blogs | Recent Blogs

theyui tobe's Blogs >> IWC Watches, Longines Watches , iwc pilot watch iwc pilot watch

IWC announced the release of the new Manufacture Tourbillon Grand Feu. Glazed dial watch with staff, are rare treasures. There are very few watchmakers fdcxv123 can rely on traditional techniques, handmade genuine enamel dial.
IWC uses the award-winning homemade heart movement, completely refined in the own factory flywheel, and has the following characteristics: silicon replica IWC Pilots Watch UTC escape wheel and lever, intelligent weight balance, 28'800 BpH fast shock, machine Core and Case engraved individually numbered.

Silicon escapement wheel and the lever has the following three advantages: 1. Do not require oil to operate, and thus put an end to the oil faded off and drying problems. 2 escapement Lunbu Shang oil, lubricating oil contamination of the movement to iwc pilot watch avoid the risk of other components. 3 It's very light material (low inertia), watch the operation of each of the next stop will be to promote and escapement wheel. The lighter the silicon escape wheel inertia is low, and better energy efficiency. 4 has good friction performance, reduce friction and reduce energy consumption, energy requirements are reduced movement.

The silicon escape wheel has a better than three general advantages of the escapement wheel, the tourbillon mechanism is particularly useful. Silicon escape wheel to reduce the focus, and there is a better anti-friction properties, can continue to improve energy efficiency. Therefore, with silicon escapement wheel of the IWC Tourbillon watch dial iwc watches for sale and allocated on the location of the amplitude of more than 300 degrees. Even in the crown down position, amplitude also exceeded 275 degrees, the performance was better than other senior Tourbillon.

IWC Tourbillon contains 80 separate components. Each component as much as possible with the highest endurance, accuracy up to 1-2 microns (0.001-0.002 mm), entirely IWC in Plan-les-Ouates workshop equipment within the ultra-precision CNC made. The new IWC Big Pilots Watch generation of instruments and refined the X and Y axis endurance up to 1 micron, Z-axis is 2 microns. Although the ultimate in precision, each individual component or impossible to achieve hundred percent well-balanced weight distribution. Made a run to the tourbillon accurate, well-balanced weight distribution is extremely important, and the IWC Tourbillon solution is outside the frame bordered patented "Smart Screw" system. Tourbillon frame inlaid with intelligent face of the main frame round screw system. After the highly skilled craftsmen to the main frame in the next round replica IWC Big Pilots Watch of two screws, with or change to a small metal ring to balance the weight of the tourbillon frame center. In general, watchmaker requires eight hours to adjust the small ring, until the weight of the entire tourbillon frame to achieve the perfect balance.

IWC Tourbillon the speed of 4 Hz, while the balance will beat 28,800 times per hour. Therefore, IWC Tourbillon balance wheel swings 28,800 times an hour, and then the gear train forward 691,200 times per hour, that is, every four years on the beat more than one hundred million times. The market are the best tourbillon with 3 Hz speed. "Beats per hour IWC Pilots Watch UTC speed" (BpH) faster, you can make more precise tourbillon movement. The higher the amplitude, can further reduce the movement by turning effect.