Active Blogs | Popular Blogs | Recent Blogs

jj jj's Blogs >> false eyelash wholesale The glue chip glass is a type of glue that is used for decoration of the glasses.

After this, we need to prepare the glue applied to it on the glass. For this, we must be mixed with water. Proportion of water glue is very important, wholesales frosted glass, because it will affect the design pattern is to be formed on the glass. Should use cold water, mixed with stickers. This ideal ratio of 2:1, the two parts of water and part of the glue. After mixing, the adhesive should be absorbed by the water, so it should be placed approximately one hour.

After some time, the formation of gel-like mixture from this. This mixture should be heated at about 140 degrees Celsius double boiler. However, float glass manufacturer, it should not be allowed to boil. In cleaning the glass with support, such as dams, to avoid overcurrent glue, you have to pour the mixture. However, before the glass should be placed horizontally. It is very important to the glass on a level surface. This will help the glass surface uniformly spread the glue. Glue should be left to dry.

Can be divided into three stages of drying. The first stage is the pre-drying phase. Then, glass sliding wardrobe doors, the second stage is the pre-drying phase. This should be about 12 to 24 hours, at this stage, from its water content is eliminated. Then, is the fragmentation of the secondary drying stage. Glue During this time, in a few places to start cracking or peeling. This is called fragmentation adhesive glue is applied to the glass, which gives a special appearance.